|
|
| |
|
|
|
|

|

|
Click to enlarge image
|
Model Number |
DN-50W |
Description
The DN-50W has designed specifically to operate with strain gauge sensors such as Fast - measurement of Load cell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick using four push buttons only. And comparison output are available.
- Sampling speed : Appir. 1000Times Per Second
Features
- High resolution (24bit ADC, 16bit DAC)
- High precision (more than 0.01% F.S) and stability
- Quick sampling speed (1000times/sec)
- Relay output : Hi, Low, NG, OK.
- UNIT CONVERSION : kg, N, lb, kg/cm2, bar, MPa
- Display part and analogue zero by auto zero
- Analog Peak Hold
- Small Size (96 X 48 X 128mm)
- Built-in Shunt calibration switch
- Peak & sample hold
- Watch dog
Option
- OP-01 : 4~20mA output
- OP-02 : RS232C serial interface
- OP-03 : RS485 Multi drop interface
Specifications
| Spec. |
Accuracy |
| Application sensor |
Strain guage sensor (350Ohm or 120Ohm) |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ohm) available 4 |
| Zero adjustment range |
100%F.S (Auto Zero) |
| Input signal |
0.5 ~ 3.0mV/V |
| AD converter |
24bit 1000times/sec |
| DA converter |
16bit 1000times/sec |
| Display |
-19999 ~ +99999 |
| Display speed |
Appox. 32times/sec |
| Character height |
7Segment 14mm |
| Decimal point |
Random setting available |
| Sampling speed |
Max 1000 times/sec |
| Zero variation |
within 0.5µV/°C |
| Sensitivity variation |
50ppm/°C |
| Voltage output |
0 ~ 10V (OP. 4~20mA) |
| Usage temperature range |
-10°C ~ 60°C |
| Humidity |
less than 80% RH (no dew condensation) |
| Power source used |
AC 85 ~ 265V 50/60Hz |
| Relay output |
Contact capacity : AC125/0.5A, DC241/1A Relay life time : more than 5,000,000 times |
Dimensions

|
|
|
|
| |
|
|
|